research use only

ABT-737 Bcl-2 Inhibitor

Cat.No.: S1002

ABT-737 is a BH3 mimetic inhibitor of Bcl-xL, Bcl-2 and Bcl-w with EC50 of 78.7 nM, 30.3 nM and 197.8 nM in cell-free assays, respectively; no inhibition observed against Mcl-1, Bcl-B or Bfl-1. ABT-737 induces mitochondrial pathway apoptosis and Mitophagy. Phase 2.

ABT-737 Bcl-2 Inhibitor Chemical Structure

Chemical Structure

Molecular Weight: 813.43

Jump to

Quality Control

Batch: Purity: 99.99%

99.99

Related Targets	Caspase PD-1/PD-L1 Ferroptosis p53 Apoptosis related Synthetic Lethality STAT TNF-alpha Ras KRas
Other Bcl-2 Inhibitors	Navitoclax (ABT-263) S63845 Obatoclax Mesylate (GX15-070) A-1331852 A-1210477 TW-37 A-1155463 Dihydrochloride AZD5991 UMI-77 (R)-(-)-Gossypol (AT-101) acetic acid

Solubility in DMSO or water

In vitro
Batch:

DMSO : 163 mg/mL (200.38 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Water : Insoluble

Ethanol : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 100 mg/mL (122.93 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Water : Insoluble

Ethanol : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 100 mg/mL (122.93 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Water : Insoluble

Ethanol : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 100 mg/mL (122.93 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Water : Insoluble

Ethanol : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 100 mg/mL (122.93 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Water : Insoluble

Ethanol : Insoluble

The solubility data above are all experimental results (not literature values).

Molarity Calculator

Mass	Concentration	Volume	Molecular Weight
Mass value Mass unit	Concentration value Concentration unit	Volume value Volume unit	Molecular weight (g/mol)

Dilution Calculator Molecular Weight Calculator

In vivo batch selection In vivo Batch:
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Clear solution	2%DMSO 1 40%PEG300 2 5%Tween80 3 53%ddH2O Validated by Selleck labs. Should you need adjustments to this formulation, contact our sales team for custom testing.	2.000mg/ml (2.46mM)	Taking the 1 mL working solution as an example, add 20 μL of 100 mg/ml clarified DMSO stock solution to 400 μL PEG300, mix evenly to clarify it; add 50 μL Tween80 to the above system, mix evenly to clarify it; then continue to add 530 μL ddH2O to adjust the volume to 1 mL. . The mixed solution should be used immediately for optimal results.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.

In vivo Formulation Calculator (Clear solution)

Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)

Dosage: mg/kg Average weight of animals: g Dosing volume per animal:μL Number of animals:

Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)

% DMSO + % + % Tween 80 + % ddH₂O

%DMSO+ %

Calculation results:

Working concentration: mg/ml;

Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )

Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH₂O, mix and clarify.

Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.

Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such as vortex, ultrasound or hot water bath can be used to aid dissolving.

Read more about ABT-737 solubility in DMSO or water

Search by Cell Line | Choose a Research Area to Find Working Concentrations

Read more about ABT-737 working concentrations for cell culture treatment

Mechanism of Action

Information	ABT-737 is a potent, competitive BH3-mimetic inhibitor of Bcl-2, Bcl-xL, and Bcl-w. It affects intrinsic apoptotic signaling by displacing pro-apoptotic proteins like Bax and Bak, effectively promoting mitochondrial outer membrane permeabilization and cancer cell apoptosis.
Read more about ABT-737 IC50 for cell-based and cell-free assays
Primary Applications and Mechanism of Action

Read more about ABT-737 Mechanism of Action

Chemical Information, Storage & Stability

Molecular Weight	813.43	Formula	C₄₂H₄₅ClN₆O₅S₂	Storage (From the date of receipt)	3 years-20°Cpowder
CAS No.	852808-04-9	Download SDF		Storage of Stock Solutions	1 year-80°Cin solvent 1 month-20°Cin solvent
Synonyms	N/A			Smiles	CN(C)CCC(CSC1=CC=CC=C1)NC2=C(C=C(C=C2)S(=O)(=O)NC(=O)C3=CC=C(C=C3)N4CCN(CC4)CC5=CC=CC=C5C6=CC=C(C=C6)Cl)[N+](=O)[O-]

Read more about storage & stability

Read more comparative analysis about ABT-737

Frequently Asked Questions

Question 1:
What is the recommended method for reconstituting it for in vivo animal study?

Answer:
For oral administration, we suggest the vehicle: 30% Propylene glycol, 5% Tween 80, 65% D5W, at up to 30mg/ml; For injection, it can be dissolved in 2% DMSO/50% PEG 300/5% Tween 80/ddH2O at 2.5 mg/ml.

Dilution Calculator

Calculate the dilution required to prepare a stock solution. The Selleck dilution calculator is based on the following equation:

Concentration _(start) x Volume _(start) = Concentration _(final) x Volume _(final)

This equation is commonly abbreviated as: C1V1 = C2V2 ( Input Output )

*When preparing stock solutions always use the batch-specific molecular weight of the product found on the vial label and MSDS / COA (available online).

The Serial Dilution Calculator Equation

Serial Dilutions

Concentration (start):

Dilution-folds:

Computed Result

C1=C0/X	C1:		LOG(C1):
C2=C1/X	C2:		LOG(C2):
C3=C2/X	C3:		LOG(C3):
C4=C3/X	C4:		LOG(C4):
C5=C4/X	C5:		LOG(C5):
C6=C5/X	C6:		LOG(C6):
C7=C6/X	C7:		LOG(C7):
C8=C7/X	C8:		LOG(C8):